VDF Flooring Services
Sana VDF Flooring team specializes in the installation of VDF Flooring in industrial settings. VDF Flooring is a process by which VDF flooring can be created. Tremix, Sweden, developed vacuum dewatered concrete. It is also known as tremix in India. This system is used to lay high-quality concrete floors at a lower cost. This method involves the vacuum dewatering of concrete. Vacuum dewatering is used to remove excess water immediately after compaction and placing. This allows for lower water content and higher water to cement ratio. Lower water to cement ratio will automatically lead to noticeable improvements in nearly all concrete properties.
Concrete floors or pavements of high quality need to be level. They also need to have high wear resistance, high compressive strengths, low shrinkage, and minimal water permeability. VDF Flooring is Vacuum Dewatered Flooring. This special method is used to make concrete flooring that has a higher Compressive Strength, Tensile Strength and Abrasion Resistance. It also minimizes shrinkage and floor wraps. VDF Flooring has a higher strength, longer life, better finish, and faster work.
This system uses VDF floors, or vacuum dewatered flooring. Concrete is poured into the ground and vibrations from the vibrator are applied to the panels. The vacuum dewatering process in our VDF Constructions improves strength and durability of concrete. This is done by decreasing the water-cement ratio right after it is placed. Usually, floors and other flatwork with less than half of 1% cement are affected.
VDF/Tremix flooring is similar to the other and can be found in most industries. Because heavy machinery and transporters require rigid surfaces for movement, a rigid surface is necessary. VDF/Tremix floorings are extremely durable. It is also very affordable and lasts a long time. It is low-maintenance, which means that it puts less strain on your pocket. If you’re looking for VDF flooring services, Sana VDF Flooring is the right place.
TYPICAL VDF FLOORING APPLICATION AREAS?
- Warehouses and Godowns
- Roads and Sports Courts
- Cellars, Parking Areas
- Production Areas
- Pharmaceutical Companies
- Used as the base floor for Epoxy & PU Floorings
Benifits of VDF Flooring – Vacuum Dewatered Flooring
- Increased Compressive strength by more than 50%.
- Reduced Cement consumption by more than 30% as no cement is required separately for finishing.
- Increased Abrasion resistance by more than 50%.
- Increased wear resistance.
- Minimum dusting & crack formation.
- Minimum dry and plastic shrinkage and floor wraps.
- Uniform homogeneous floor with High flatness accuracy.
- Lower water permeability due to increased density.
- High early strength minimizes damage on newly cast floors.
- Earlier utilization and Reduced maintenance cost.
